Radiomaster RP1 V2 2.4GHz ExpressLRS ELRS Nano Receiver with TCXO

The RadioMaster RP series receivers now feature a built-in TCXO (temperature-compensated crystal oscillator), which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.

The RP1 V2 2.4GHz ELRS nano receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature an ESP8285 MCU and an SX1280 RF chip. The RP1 has a UFL antenna socket for full-range antenna use.

The RP1 V2 feature built-in WIFI, allowing users to upgrade the firmware and configure the receiver via the built-in WebUI using a PC or mobile phone.

Due to the low-latency and high-refresh-rate RF module, the RP1 V2 is ideal for FPV races or Long Range. These ultra-light and Nano-sized receivers are suitable for Whoops, drones, and fixed-wing models, as they can fit just about anywhere.

The TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation.

The key features of the RP1 V2 Nano ExpressLRS 2.4GHz Receiver include:

Improved PCB design for better heat dissipation Upgraded rigid antenna with greater durability and performance LED on the top side of the PCB Solder pads that are improved and easier to solder to Built-in TCXO (temperature compensated crystal oscillator) Specifications: Receiver Type: ISM MCU: EPS8285 RF Chip: SEMTECH SX1281 Telemetry RF power: 10mW Antenna: 65mm 2.4GHz T Antenna Frequency Range: 2.404 - 2.479 GHz Maximum receive refresh rate: 500Hz / F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: 5V Weight: 2.2g (including antenna) Dimensions: 13mm x 11mm x 3mm Firmware Version: ExpressLRS v2.4 pre-installed

The package includes the RP1 V2 ExpressLRS 2.4GHz Nano Receiver, a 65mm UFL 2.4GHz T Antenna, a user manual, and a CRSF wire.

product information: